Panasonic DMC-FP2 Operating Instructions For Advanced Features page 91

Memory cards
●
To prevent damage to cards and data
• Avoid high temperatures, direct sunlight, electromagnetic waves, and static electricity.
• Do not bend, drop, or expose to strong impacts.
• Do not touch connectors on reverse of card or allow them to become dirty or wet.
●
When disposing of/transferring memory cards
• If using the 'format' or 'delete' functions on your camera or computer, this only
changes the file management information, and does not completely delete the data
from within the memory card. When disposing of or transferring your memory cards,
we recommend physically destroying the memory card itself, or using commercially
available computer data erasing software to completely delete the data from the card.
Data within memory cards should be managed responsibly.
LCD Monitor
●
Do not press hard on the LCD monitor. This may cause uneven display and damage
the monitor.
●
Do not press on the monitor with sharp, hard instruments such as ballpoint pens.
●
Do not rub the LCD monitor forcefully or push on it.
●
In cold climates or other situations when the camera becomes cold, the LCD monitor
may be slightly less responsive than normal immediately after startup. Normal
brightness will return once the internal components have warmed up.
Personal Information
If you complete [NAME] or [AGE] settings in [BABY] Mode, keep in mind that the camera
and recorded pictures will contain personal information.
●
Disclaimer
• Data containing personal information can be altered or lost due to malfunction, static
electricity, accidents, breakdowns, repairs, or other operations.
Panasonic will not be liable for any damage that occurs, direct or indirect, as a result
of the alteration or loss of data containing personal information.
●
When ordering repairs or transferring/disposing of the camera
• To protect your personal information, please reset the settings. (→20)
• If any pictures are contained in the built-in memory, copy (→73) them to a memory card
if necessary, and then format (→21) the built-in memory.
• Remove the memory card from the camera.
• When ordering repairs, the built-in memory and other settings may be returned to the
initial purchase state.
• If the above operations cannot be performed because of a camera malfunction,
consult with the dealer or nearest Service Centre.
When transferring or disposing of your memory card, see 'When disposing of/
transferring memory cards' in the previous section.
91
VQT2N02