Download Print this page
Rane MPE 14 Instruction Manual
Rane MPE 14 Instruction Manual

Rane MPE 14 Instruction Manual

Programmable equalizers

Advertisement

Quick Links

Professional Audio Products Data Sheet
The MPE 14, two-channel, 14-band, 2/3-octave, and the
MPE 28, one-channel, 28-band, 1/3-octave MIDI program-
mable equalizers begin a generation of automated signal
processing from Rane Corporation.
: Presets can be stored for varying
room configurations, and recalled via front panel, or external
contact closures with the Rane RPS 4 Remote Program
Selector (converting switch closures to MIDI program change
commands). Access security can be maintained in two levels
of front panel lockout.
The MPE series interface to any
MIDI controller or sequencer, allowing not only program
changes, but also curve modification in real time through the
use of MIDI System Exclusive (SYSEX) messages.
Not only can the MPEs overcome defi-
ciencies in synthesizer and drum machine voices, they also
add a new musical dimension: Expression. The MPEs respond
to expression controllers such as MIDI continuous controllers
or channel pressure aftertouch. This feature allows dynamic
control and continuous modification of the EQ curve. Bend
your bass or tweak your treble; it’s now at your fingertips, in
real time.
The MPEs are digitally controlled analog equalizers. Start
with Rane’s proven equalizer performance. Put it under the
powerful control of a 16-bit, 16MHz microcontroller. Pro-
gram the microcontroller to provide full MIDI implementa-
tion, including SYSEX. Add it all together and you get an
unbeatable programmable equalizer. The MPEs utilize Rane’s
exclusive Interpolating Constant-Q filter technology. The
same design used in the commercial grade model GE 30 for
smooth, consistently accurate performance, and minimum
interaction. The MPEs are fitted with fully balanced Inputs
and Outputs using both 3-pin and ¼" TRS connectors.
The MPEs allow the user to store 128 equalization curves
recalled by either the front panel controls, MIDI commands,
another MPE, a Rane RPS 4, or from a computer. DOS
software is available from the factory (at no charge) that
allows graphic editing of the MPE. Other software companies
produce MPE Editor/Librarians, such as Opcode Systems
(Galaxy) and Mark of the Unicorn (Unisyn and X-oR).
The MPEs also feature decimal and octal program display,
program mapping, curve weighting, ramping, copying, and a
wealth of usable factory EQ presets. Please consult the
(available upon request) for further information
on these and other advanced features.

Advertisement

loading

Summary of Contents for Rane MPE 14

  • Page 1 MIDI commands, room configurations, and recalled via front panel, or external another MPE, a Rane RPS 4, or from a computer. DOS contact closures with the Rane RPS 4 Remote Program software is available from the factory (at no charge) that Selector (converting switch closures to MIDI program change allows graphic editing of the MPE.
  • Page 2 Professional Audio Products Data Sheet Parameter Specification Limit Units Conditions/Comments Equalizer: Channels (2) MPE 14; (1) MPE 28 ..Bands: MPE 14 (14) 2/3 Octave ISO Spacing 40Hz to 16kHz ...... MPE 28 (28) 1/3 Octave ISO Spacing 31.5Hz to 16kHz ..Type...
  • Page 3 EQ changes. This curve ramping feature operates in real time. Rane provides an MPE Editor for DOS (at no similarly to “dissolve” in slide and video productions. charge) that allows graphic editing on a PC with a MIDI...
  • Page 4 Both shall be capable of processing audio signal rack occupying 1U space. levels of a maximum of +20dBu. RFI input filters shall be The unit shall be a Rane Corporation Model MPE provided. A low filter shall exist with 18dB/octave slopes and Programmable Equalizer.

This manual is also suitable for:

Mpe 28