Maintenance And Care; Machine Storage; Install The Replacement Brush Belt - Bissell ReadyClean 47B2 Series User Manual

Machine storable
For best results, a few simple steps can assure
your machine is well maintained after your
cleaning is complete.
1, Wrap power cord around Quick Release
Cord Wrap
TM
on side of the machine.
2, Wipe all surfaces with a soft cloth. Store
cleaner upright in a protected, dry area.
NOTE: You may have cleaning solution remain-
ing in the solution tank. You may store your
machine this way for the next cleaning task, but
never keep dirty water in the collection tank.
/ WARNING
Toreduce theriskof electric shock, turn power s witch
off anddisconnect plugfromelectrical outletbefore
performing maintenance ortroubleshooting checks.
/ CAUTION
Donotstoreunitwherefreezing mayoccur.
Damage t o internal c omponents m ayresult.
Install the replacement brush belt -
(For Model 47B2 and 20R7 Series only)
1, Turn the machine off and unplug from
wall outlet.
2, Remove solution and collection tanks.
3, Lay machine down to access the bottom
of the machine,
4, With a Phillips head screwdriver, unscrew
the belt cover and remove,
5, Remove the brush end cap and remove
belt from brush,
6, Brush can now be removed.
7, Belt can be removed by sliding off the
motor pulley.
8, Clean or replace belt, Attach belt to
motor pulley and brush, insert brush into
right side end cap.
9, Reattach the left end cap and slide brush
back into place,
10, Replace the belt cover and screw into place,
11, Manually rotate brush to make sure it rotates
freely and that the belt is aligned properly.
www, BISSELL,com _r 800,237,7691
8