Sound Adjustments; Changing The Sound - Sony DVP-NS70H Service Manual

DVP-NS70H
QQ
3 7 63 1515 0
Checking the play information of
the disc
To check the DVD/CD text
Press TIME/TEXT repeatedly in step 2 to
display text recorded on the DVD/CD.
The DVD/CD text appears only when text is
recorded in the disc. You cannot change the
text. If the disc does not contain text, "NO
TEXT" appears.
BRAHMS SYMPHONY
To check DATA CD/DATA DVD (MP3 audio)
album name, etc.
By pressing TIME/TEXT while playing MP3
audio tracks on a DATA CD/DATA DVD,
you can display the name of the album/track
and the audio bit rate (the amount of data per
second of the current audio track) on your TV
screen.
Bit rate
T 17:30 128k
JAZZ
RIVER SIDE
Album name
Track name
TE
L 13942296513

Sound Adjustments

Changing the Sound

When playing a DVD VIDEO recorded in
multiple audio formats (PCM, Dolby Digital
or DTS), you can change the audio format. If
the DVD VIDEO is recorded with
multilingual tracks, you can also change the
language.
With CDs, DATA CDs, DATA DVDs or
VIDEO CDs, you can select the sound from
either the right or left channel and listen to the
sound of the selected channel through both
the right and left speakers. For example, when
playing a disc containing a song with the
vocals on the right channel and the
instruments on the left channel, you can hear
the instruments from both speakers by
selecting the left channel.
AUDIO
1
Press AUDIO during playback.
The following display appears.
www
1 : ENGLISH DOLBY DIGITAL 3/2.1
2
Press AUDIO repeatedly to select
the desired audio signal.
http://www.xiaoyu163.com
Checking the information on the
front panel display
You can view the time information and text
displayed on the TV screen also on the front
panel display. The information on the front
panel display changes as follows when you
change the time information on your TV
screen.
When playing a DVD VIDEO or DVD-VR
mode disc
Playing time of the current title
Remaining time of the current title
Playing time of the current chapter
Remaining time of the current
chapter
Text
Current title and chapter number
(returns to top automatically)
,continued
◆ When playing a DVD VIDEO
Depending on the DVD VIDEO, the
choice of language varies.
When 4 digits are displayed, they
indicate a language code. See "Language
Code List" on page 75 to see which
language the code represents. When the
same language is displayed two or more
times, the DVD VIDEO is recorded in
multiple audio formats.
◆ When playing a DVD-VR mode disc
The types of sound tracks recorded on a
disc are displayed. The default setting is
underlined.
Example:
• 1: MAIN (main sound)
• 1: SUB (sub sound)
• 1: MAIN+SUB (main and sub sound)
◆ When playing a VIDEO CD, CD or DATA
CD/DATA DVD (MP3 audio)
The default setting is underlined.
• STEREO: the standard stereo sound
• 1/L: the sound of the left channel
(monaural)
• 2/R: the sound of the right channel
(monaural)
◆ When playing a Super VCD
The default setting is underlined.
• 1:STEREO: the stereo sound of the
audio track 1
• 1:1/L: the sound of the left channel of
the audio track 1 (monaural)
• 1:2/R: the sound of the right channel of
the audio track 1 (monaural)
• 2:STEREO: the stereo sound of the
audio track 2
• 2:1/L: the sound of the left channel of
the audio track 2 (monaural)
• 2:2/R: the sound of the right channel of
the audio track 2 (monaural)
Notes
• While playing a Super VCD on which the audio
track 2 is not recorded, no sound will come out
x ao
when you select "2:STEREO," "2:1/L," or
y
"2:2/R."
• When playing DVD-RW/DVD-R in VR mode: If
you connected to an AV amplifier (receiver) using
. i
the DIGITAL OUT (COAXIAL or OPTICAL)/
HDMI OUT jack and want to switch between the
sound tracks, set "DOLBY DIGITAL" to "D-
PCM" in "AUDIO SETUP".
,continued
http://www.xiaoyu163.com
8
When playing a DATA CD/DATA DVD (MP3
audio)
Playing time and number of the
current track
Track name
Current album and track number
(returns to top automatically)
When playing a VIDEO CD (without PBC
functions) or CD
Playing time and number of the
current track
Remaining time of the current
track
Playing time of the disc
Remaining time of the disc
Text
z Hints
• When playing VIDEO CDs without PBC
functions, the track number and the index number
are displayed after the text.
• When playing VIDEO CDs with PBC functions,
the scene number or the playing time are
displayed.
• Long text that does not fit in a single line will
scroll across the front panel display.
Q Q
• You can also check the time information and text
3 6 7 1 3
using the Control Menu (page 13).
39 40
Checking the audio signal
format
You can check the audio signal format by
pressing AUDIO repeatedly during playback.
The format of the current audio signal (Dolby
Digital, DTS, PCM, etc.) appears as shown
below.
Example:
Dolby Digital 5.1 ch
1 : ENGLISH DOLBY DIGITAL
Front (L/R) LFE (Low Frequency
+ Center Effect)
Example:
Dolby Digital 3 ch
2 : SPANISH DOLBY DIGITAL
Front (L/R)
About audio signals
Audio signals recorded in a disc contain the
sound elements (channels) shown below.
Each channel is output from a separate
speaker.
• Front (L)
• Front (R)
• Center
• Rear (L)
• Rear (R)
• Rear (Monaural): This signal can be either
the Dolby Surround Sound processed
signals or the Dolby Digital sound's
monaural rear audio signals.
• LFE (Low Frequency Effect) signal
Note
If "DTS" is set to "OFF" in "AUDIO SETUP"
u163
(page 67) the DTS track selection option will not
appear on the screen even if the disc contains DTS
tracks.
.
41 42
1-10
2 9 9 4 2 8
Notes
• Depending on the type of disc being played, the
DVD/CD text or track name may not be
displayed.
• The player can only display the first level of the
DVD/CD text, such as the disc name or title.
• Playing time of MP3 audio tracks may not be
displayed correctly.
• If you play a disc containing JPEG image files
only, "NO AUDIO DATA" appears when
"MODE (MP3, JPEG)" is set to "AUTO,"
"JPEG" appears when "MODE (MP3, JPEG)" is
set to "IMAGE (JPEG)" in the front panel display.
1 5 0 5 8 2 9 9 4
TV Virtual Surround
Settings
(TVS)
When you connect a stereo TV or 2 front
speakers, TVS (TV Virtual Surround) lets
you enjoy surround sound effects by using
sound imaging to create virtual rear speakers
from the sound of the front speakers (L: left,
R: right) without using actual rear speakers.
TVS was developed by Sony to produce
Rear (L/R)
surround sound for home use using just a
stereo TV.
This only works when playing a multichannel
3 / 2 .1
Dolby audio sound track. Furthermore, if the
player is set up to output the signal from the
DIGITAL OUT (OPTICAL or COAXIAL)/
HDMI OUT jack, the surround effect will
only be heard when "DOLBY DIGITAL" is
set to "D-PCM" in "AUDIO SETUP" (page
66).
2 / 1
Rear
(Monaural)
1
Press SUR during playback.
The following display appears.
TVS DYNAMIC THEATER
m
2
Press SUR repeatedly to select
one of the TVS sounds.
co
See the explanations given for each item
in the following section.
• TVS DYNAMIC THEATER
• TVS DYNAMIC
• TVS WIDE
• TVS NIGHT
• TVS STANDARD
9 9
2 8 9 9
SUR