Disassembly And Assembly Instructions - Samsung SGH-P200 Service Manual

11. Disassembly and Assembly instructions

11-1.Disassembly
1
1. Unscrew 4 screws in rear
1.Be careful of the damage of cover and scratch.
3
1. Remove tape main FPCB.
2. Unsolder FPCB from the main PBA.
3. Disjoint FPCB from the main PBA
connector
1.Be careful of the damage of LCD connector pins.
5
1. Remove the screw cover
Remove the
screw cover
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
1. Separate the rear cover
from the side part
1.Be careful of the damage of cover and scratch.
4
1. Open the actuator
2. Pull out the FPCB carefully.
1.Be careful of the damage of FPCB.
6
1.Remove the screw from front case.
Screw marked
1.Be careful of the damage of cover and scratch.
11-1
6 Point