Pioneer MEH-P7100R Service Manual page 73

Hide thumbs Also See for MEH-P7100R:

Table of Contents

- Removing the PU Unit

1. Provide short solder in section A, then remove the

connector

2. Remove the two screws, then erect the board in the

direction indicated by the white arrow head.

3. Remove the two screws and two springs.

4. Drive out the PU Unit through the direction indicated

by the white arrow head.

MEH-P7100R,P7150

MD Unit

Spring

PU Unit

Spring

Table of Contents

Chapters

Table of Contents

Meh-p7150