EL iconnect User Manual page 25

Workspace
The workspace offers additional links to the following pages of the application: System
Operation, Settings, History, Video and Automation. When you choose a page, either
from the Main Menu, or from the workspace, the page is displayed in the workspace.
For example, if you choose Arm/Disarm from the Main Menu, System Operation area
and System Status area are displayed in the workspace (see the example below).
You can arm and disarm the system using the Arm/Disarm drop-down box (upper-right
part of the page) or using the buttons in the System Operation Area.
The Web Application allows you to arm and disarm your system using any of
the available arming methods.
On the Status Bar below on the page you can see the current status of the
system (in our example it is Disarmed and System Ready, which means that the
system and all the detectors are working properly and there are no events to
report). It is possible to check if there were alarms in the system.
It is important to note that when you are using the Web application, the system
is armed with the programmed delay
Home Button
Press the Home button on the Main menu to return to the Main page at any time.
Figure 8: Workspace Example Page
-25-