Table of Contents
Advertisement
System Trouble Indication
In the event that the system detects a trouble condition, "System Trouble" appears on
the display. To identify the problem, scroll through the trouble list by pressing .
Scrolling the trouble list also silences system trouble tones that may be sounded if
enabled in programming. When the trouble condition is restored, it is removed from the
system trouble list. For detailed information on system messages, see Arm Status
Indication.
2.2.
Alarm Sounding Patterns
The following table summarizes various alarms sounded by the control system.
Alarm
Burglary
Fire
Gas
Medical
Flood
Environmental
2.3.
Keyfobs
The iConnect
functions of the buttons on each keyfob are shown below.
Full Arm
Perimeter Arm
or Home
Automation/PGM
2.4.
Wireless Keypads
The system supports up to four Wireless Keypads. The Wireless Keypad (EL-4727) is an
intelligent two-way wireless keypad with LCD display. Apart from serving as an
additional arming station, the Wireless Keypad provides memo recording options,
control over up to 16 home automation devices, and panic alarm function. You can arm
and disarm the system using the Smartkey (if supported).
Alarm Sounding Pattern Description
ON (continuously)
ON - ON - ON, 1.5-second pause, ON - ON – ON......
ON - ON - ON - ON (short bursts), 5 second pause, ON - ON - ON -
ON......
ON (continuously) – only applicable for Medical alarm from zone
4 rapid tones sounded once per minute (same as Trouble tones)
4 rapid tones sounded once per minute (same as Trouble tones)
supports two types of keyfob transmitter (EL-4714, EL-4711M/P). The
Disarm
Part Arm
or Home
Automation/PGM
EL-4714
EL-4711M/P
-12-
Medical/Panic
Emergency
Advertisement
Table of Contents
