Panasonic TH-37PX60U Technical Manual page 31

TH-37PX60U, TH-42PX60U and TH-42PX600U Driver Setup
Adjustment
Item / Preparation
1. Input a white signal to plasma video input.
2. Set the picture controls as follows.
Picture menu: Vivid
Picture: +30
Aspect: Full
Caution
1. First perform Vsus adjustment.
2. The Confirmation of Vscn voltage should be performed
after the confirmation of Vad adjustment.
When Vad=-90V, Voltage of Vscn is 30V ±3V.
Initialization Pulse Adjust
1. Input the White signal to plasma video
input.
2. Set the picture controls as follows.
Picture menu : Vivid
Picture : +25
Aspect : Full
3. Connect Oscilloscope to TPSC1 (T2)
and adjust VR6602 for 195+10 Sec.
Test point Volume
T2 TPSC1 (SC) VR6602 (SC
TH-50PX60U and TH-50PX600U Driver Setup Adjustment
Item / Preparation
1. Input a white signal to plasma video input.
2. Set the picture controls as follows.
Picture menu: Vivid
Picture: +30
Aspect: Full
Caution
1. First perform Vsus adjustment.
2. The Confirmation of Vscn voltage should be performed
after the confirmation of Vad adjustment.
When Vad=-90V, Voltage of Vscn is 30V ±3V.
Initialization Pulse Adjust
1. Input the White signal to plasma video
input.
2. Set the picture controls as follows.
Picture menu : Vivid
Picture : +25
Aspect : Full
3. Connect Oscilloscope to TPSC1 (T2)
and adjust VR6602 for 195+10 Sec.
Test point Volume
T2 TPSC1 (SC) VR6602 (SC
Level
195 ± 10 Sec
59
Level
195 ± 10 Sec
60
Driver Setup Table
Panel Label
Driver Setup Table
Panel Label
Adjustment
Voltage