Adjustment - Hitachi L26-H03B Service Manual

6. Adjustment

6.1 White Balance Adjustment
Approximately 2 hours should be allowed for warm up before proceeding white balance adjustment.
Before White balance adjustment, you must set the color analyzer CA210.
6.1.1 Calibration
1. Receive XGA 60Hz 100% white signal by PC input.
2. Select PC input by R/C Input Select button.
3. Enter FACTORY MODE by R/C [べんり][青][9][1][1][1] (as picture 1, picture 2)
Picture 1 Remote Controller
4. Choose "OPTION" by R/C [上／下] button.
Then press R/C [決定] button. -> Enter to OPTION menu. (as picture 3)
5. Choose "PC CALIBRATE" by R/C [上／下] button.
Then press R/C [右] button. -> Value changes 0 to 1 (red letter).
Then press R/C [決定]. -> PC CALIBRATE executed, and value returns to 0.
6. Press R/C [もどる] -> Return to FACTORY MODE menu.
6.1.2 Color Temperature Adjustment
1. Set picture mode "スーパー" by Menu.
1.1 Exit FATORY MODE by [メニュー] button.
1.2 Enter the "トップメニュー" by R/C [メニュー] button. Then forward to "映像設定" - "画質設定". ("画質設定"
menu indicated.)
1.3 Confirm that "対象コンテンツ" is set to "共通".
1.4 Set "映像モード" to "スーパー". Then exit "トップメニュー" by [メニュー] button.
1.5 Re-enter FACTORY MODE. (see 6.1.1 item 3.)
L26-H03B/ L26-H03W/ L32-H03B/ L32-H03W
Picture 3 OPTION Menu
Picture 2 FACTORY MODE Menu
8