Hitachi L26-H03B Service Manual page 15

L26-H03B/ L26-H03W/ L32-H03B/ L32-H03W
In case that after 10 minutes "complete file system update" or "complete update" message not displayed.
- Please confirm that Hub is turned on, and Link indicator of Hub blinks. If not, please close "boisclair updater
window" and repeat from Item 3.
10) Disconnect the Ethernet cable from TV, then turn Main power switch off.
In case that "failed file system update" message displayed.
- There is some possibility that updatefile.zip is broken. Close "boisclair updater window", and repeat from Item 5.
4. Confirm F/W Version
1) Just after F/W updated, after turn Main power switch on, "はじめて設定" is displayed. Follow the steps to exit "は
じめて設定" as shown below.
(1) "STEP 1 はじめて設定を行います" is indicated. Confirm "次へ" is high light, then press [決定] button.
(2) "STEP 2 お住まいの地方／都道府県域の選択" is indicated. Press R/C [右] button, confirm [次へ] is high light,
then press [決定] button.
(3) "STEP 3 チャンネル設定方法の選択（地上アナログ放送）" is indicated. Press R/C [上／下] button, confirm "自
動設定" is high light, then press R/C [決定] button.
(4) "STEP 5 リモコンボタン割り当て（地上アナログ放送）" is indicated. Press R/C [右] Confirm "次へ" is high light,
then press R/C [決定] button.
(5) "STEP 6 地上デジタル放送の設定" is indicated. Press R/C [上／下] button, confirm "いいえ" is high light, then
press R/C [決定] button.
(6) "地上デジタル放送を視聴する場合は、各種設定から地上デジタル 放送の設定を行ってください" is indicated.
Confirm "次へ" is high light, then press R/C [決定] button.
(7) "STEP 10 ＢＳ/ＣＳデジタル放送のコンバーター電源を設定します" is indicated. Press R/C [右] Confirm "次へ"
is high light, then press R/C [決定] button.
(8) "STEP 11 郵便番号の設定" is indicated. Press R/C [下] Confirm"次へ" is high light, then press R/C [決定] button.
(9) "STEP 12 電話回線テスト" is indicated. Press R/C [上／下] button, confirm "いいえ" is high light, then press R/C
[決定] button.
(10) "STEP 13 はじめて設定完了" is indicated. Confirm "設定完了" is high light, then press R/C [決定] button.
(11) TV starts in Terrestrial Analog TV mode.
2) Confirm F/W version by following as shown below.
(1) Press R/C "メニュー" button, then "トップメニュー" is displayed. Forward [その他機器設定] - [機器情報表示].
Then confirm the F/W version indicated near [ソフトウェアバージョン] indication.
(2) Press R/C "メニューボタン", then exit F/W version confirmation.
15