Makita BDF446 Technical Information page 8

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Speed change lever
ASSEMBLING
Assemble Speed change lever to Gear assembly. (Fig. 14)
Fig. 14
1. Be sure to put two
Compression springs
on the back of
Speed change lever.
Compression springs
[3]-4. F/R Change lever
Mount F/R Change lever on Switch before assembling Housing (R) to Housing (L). (Fig. 15)
Fig. 15
Engage the prong portion
with the projection of Switch.
2. Mount Speed change lever to
Gear assembly.
Note: Be sure to fit the hook of
Gear assembly in Speed
change lever.
hook
Gear assembly
prong portion
projection
3. Set Speed change lever to either
Low speed side or High speed side.
Low speed side
F/R Change lever
P 8/ 10
High
speed side