EMU41470
Water separator-alert indicator blinks
while cruising
EWM01500
WARNING
Gasoline is highly flammable, and its va-
pors are flammable and explosive.
Do not perform this procedure on a hot
●
or running engine. Allow the engine to
cool.
There will be fuel in the fuel filter. Keep
●
away from sparks, cigarettes, flames or
other sources of ignition.
This procedure will allow some fuel to
●
spill. Catch fuel in a rag. Wipe up any
spilled fuel immediately.
The fuel filter must be reassembled
●
carefully with the O-ring, filter cup, and
hoses in place. Improper assembly or
replacement could result in a fuel leak,
which could result in a fire or explosion
hazard.
If the water separator-alert indicator on the
6Y8 Multifunction tachometer blinks, perform
the following procedure.
1. Water separator-alert indicator
F50F, F60C, FT60D
1.
Stop the engine.
2.
Remove the top cowling.
3.
Remove the plastic tie.
Trouble Recovery
1
1. Plastic tie
4.
Disconnect the water detection switch
coupler. NOTICE: Be careful not to get
any water on the water detection
switch coupler, otherwise a malfunc-
tion could occur.
1
1. Water detection switch coupler
5.
Unscrew the filter cup from the filter
housing. NOTICE: Be careful not to
twist the water detection switch lead
when unscrewing the filter cup.
[ECM01960]
ZMU05475
[ECM01950]
ZMU05476
97