Transmitting Range; Turning The Unit On/Off; Changing Channels; Operation - Binatone Action 1000 User Manual

Private mobile radio with twin charger
Table of Contents

Advertisement

3. Operation

3.1 Transmitting range

The talk range depends on the environment and terrain. It can reach
up to 10km in wide open spaces, without obstructions such as hills or
buildings. Don't try to use two PMR units which are less than 1.5m
(5 f ee t) apart , o therwise, you may experience interference.
Important safety warning
To reduce radio frequency exposure when you are using your Action
1000 , hold the unit at least 5cm (2 inches) away from your face.
Never use your Action 1000 outdoors during a thunderstorm.
Don't use the Action 1000 in the rain.
If your Action 1000 gets wet, turn it off and remove t he batter ies .
Dry the battery compartment and leave the cover off for a
fews days. Don 't use the unit until it is completely dry.
Keep the Action 1000 out of reach of babies / young children.

3.2 Turning the Unit ON/OFF

To Turn ON;
a. Rotate the POWER/VOL button clockwise until the LCD
Screen turns ON and displays the current channel.
To switch OFF;
b. Rotate the POWER/VOL button counter clockwise until
the LCD screen turns blank.
Note: Every time you rotate the Power/Vol button to turn ON, the
volume will also turn on at its minimum level and will increase
as the button is rotated further.
Your Action 1000 has 968 Channel Combinations
The Action 1000 has 8 available main channels, To
communicate with other
you must all have your Action 1000's tuned to
a. Press the MENU button once, the current channel
number flashes on the LCD Screen.
b. Press the UP or DOWN button to select the desired
channel. The channel changes from 1 to 8, or vice versa.
c. Press the PTT button to confirm the channel setting.
Note: Refer to the "Channel Table" section of this Owner's Manual
for detailed frequency listing.
Each channel also has 38 sub-channels to let you set up
a group of users within the same channel for more private
communication. If you have set the sub-channel, you can
only communicate with other
channel and sub-channel.
To turn the sub-channel function off, simply set the
sub- channel to 0 (zero). You can communicate with
any Action 1000 user set to the same channel who
also turns off the sub-channel operation (or a has a
unit which does not have this feature).
a.
Press the MENU button twice, the current CTCSS
sub-channel number flashes on the LCD Screen.
Press the UP or DOWN button to select one of the 38
b.
CTCSS sub-channels.
c.
P
e r
Helpline No. UK/Nor ther n Ir ela nd
Binatone Help Line - 0845 345 9677
http://www.binatoneonline.com/
Web Support
Action 1000 users within range,
s s
h t
e
PTT button to confirm the sub-channel setting.
08453459677
the same channel.
PMR users tuned to the same
0818762092
04

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents