For Parts Call 606-678-9623 or 606-561-4983
For Parts Call 606-678-9623 or 606-561-4983
DECK LUBRICATION
•
After every 10 hours of operation and before
putting the deck into winter storage, lubricate
the spindle assemblies with a No. 2 multi-
purpose lithium grease. The lube fittings are
located in the spindle housing and can be
accessed from underneath the deck.
Belt Cover
Idler Pulley
Figure 35
www.mymowerparts.com
www.mymowerparts.com
REPLACING THE DECK DRIVE BELT
•
Remove the deck from beneath the tractor, (refer
to Deck Removal on page 28).
•
Remove the hex tapping screws securing the belt
covers to the deck and remove the belt from the
spindle pulleys. Refer to Figure 35.
•
Install the new belt around the spindle pulleys
and reinstall the belt covers.
•
Route the belt rearward between the two idler
pulleys and reinstall the deck following the
instructions in Deck Installation on page 29.
Idler Pulley
32
Belt Cover
'V' Belt