Additional Operation; On-Screen Display - Dvd; Maintenance And Service - NEC NDT-42 Owner's Manual

Additional Operation

On-Screen Display - DVD

You can display the general playback status on the TV
screen. Some items can be changed using the menu.
To use the on-screen display:
1. Press DISPLAY during playback.
2. Press v / V to select an item.
The selected item is highlighted.
3. Press b / B to change the setting. You can also use
the number buttons if appropriate (e.g. inputting the
title number). For some functions, press ENTER to
execute the setting.
Notes:
• Some discs may not provide all of the features shown
below.
• If no button is pressed for 10 seconds, the on-screen dis-
play disappears.
• If is displayed, action prohibited or not available.
Example: On-Screen Display during
playing DVD Video
Items
Title Number
1 / 1
Chapter Number
1 / 18
Time search
-:--:--
Example: On-Screen Display during
playing VCD
Items
Track Number
1 / 1
(or PBC mode)
Time search
-:--:--
30
Selection Method
b / B, Numbers
ENTER
b / B, Numbers
ENTER
Numbers, ENTER
Selection Method
b / B, Numbers
ENTER
Numbers
ENTER

Maintenance and Service

Refer to the information in this chapter before
contacting a service technician.
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
Keeping the exterior surfaces clean
• Do not use volatile liquids such as insecticide spray
near the unit.
• Do not leave rubber or plastic products in contact
with the unit for a long period of time. since they
leave marks on the surface.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the surfaces
are extremely dirty, use a soft cloth lightly moistened
with a mild detergent solution.
Do not use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the unit.
Maintaining the Unit
The DVD+VCR is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
For details, please contact your nearest authorized
service center.