Audio; Dolby Digital / Dts / Mpeg; Sample Freq. (Frequency); Drc (Dynamic Range Control) - NEC NDT-42 Owner's Manual

Before Operation - DVD part

AUDIO

Each DVD disc has a variety of audio output options.
Set this unit's AUDIO options according to the type of
audio system you use.
AUDIO
Dolby Digital
DTS
MPEG
Sample Freq.
DRC

Dolby Digital / DTS / MPEG

Bitstream: Select "Bitstream" if you connect the
DVD+VCR's DIGITAL AUDIO OUT jack to an ampli-
fier or other equipment with a Dolby Digital, DTS or
MPEG decoder.
PCM (for Dolby Digital / MPEG): Select when con-
nected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be
automatically downmixed to two-channel PCM
audio.
Off (for DTS): If you select "Off", the DTS signal is
not output through the DIGITAL AUDIO OUT jack.

Sample Freq. (Frequency)

If your receiver or amplifier is NOT capable of handling
96 kHz signals, select 48 kHz. When this choice is
made, this unit automatically converts any 96 kHz sig-
nals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
this unit passes each type of signal through without any
further processing.
Check the documentation for your amplifier to verify its
capabilities.

DRC (Dynamic Range Control)

With the DVD format, you can hear a program's sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). This allows you to listen to a
movie at a lower volume without losing clarity of sound.
Set DRC to On for this effect.
Bitstream
Bitstream
PCM
48KHz
On
Move Select
DVD
DVD
DVD

OTHERS

The PBC and Auto Play settings can be changed.
OTHERS

PBC

Auto Play

B.L.E
PBC
VCD
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to the
PBC.
Off: Video CDs with PBC are played the same way as
Audio CDs.
DVD
Auto Play
You can set up the DVD+VCR so a DVD disc automati-
cally starts playing whenever the DVD is inserted.
If Auto Play mode is set to On, this DVD player will
search for title that has the longest playback time and
then play back the title automatically.
On: Auto Play function is active.
Off: Auto Play function is not active.
Note:
The Auto Play function may not work for some DVDs.
On
Off
Off
Select
Move
19