ASSEMBLE THE FREEZER DRAWER
1. Pull out the rails to the full length on each side of the cabinet evenly.
2. Hang the freezer door front onto open slots on the sides.
3. Tighten four 10mm hex-head screws completely.
4. With the drawer pulled out fully, insert the lower basket (
rail system.
5. Hook the ends of the tilting pocket (
push down until they lock into place.
Be careful not to missplace the parts of refrigerator.
CAUTION
ADJUSTING THE DOORS
Now that the doors are back on the Refrigerator, you want to make sure the Refrigerator is level so
that you can make final adjustments. If the Refrigerator is not level, it will not be possible to get the
doors perfectly even.
) into the
6
) into both brackets (
), and
7
8
Slot
Slot
6
7
8
Setting Up _11