Table of Contents
Advertisement
Quick Links
Type of product
Date of purchase
Name
Address
15
ROYAL Reverse Osmosis Drinking Water Systems
Memo
Tel
URE
DRINKING WATER SYSTEM
DRINKING WATER SYSTEM
REVERSE OSMOSIS SYSTEM
RS-103TDS
USER'S MANUAL
01
Introduction of RS-103TDS
FULL
FLUSH
WORK
SOURCE MANUAL
T.D.S./Time
02
What is reverse osmosis
MANUAL
FLUSH
RESET
T.D.S.(XI ppm)/Time(X 10m)
RO Computer Controller
03
Components & Selected filters
04
Cartridge filters
05
The parts of RS-103TDS
06
LCD display
07
Tubing connection diagram
08
Installation diagram
09
Change filters
10
Change membrane
11
Operation regulation
13
FAQ
14
Maintenance checking list
15
Memo
Thank you very much for selecting Pure-Pro Water Corp.
In order to bring the best use of your system, please read
the user's manual carefully before installation and follow
the regulations.
URE
Advertisement
Table of Contents
Related Manuals for PurePro RS-103TDS
Summary of Contents for PurePro RS-103TDS
- Page 1 What is reverse osmosis MANUAL FLUSH RESET T.D.S.(XI ppm)/Time(X 10m) RO Computer Controller Components & Selected filters Cartridge filters The parts of RS-103TDS LCD display Tubing connection diagram Installation diagram Change filters Change membrane Operation regulation Maintenance checking list Memo Thank you very much for selecting Pure-Pro Water Corp.
-
Page 2: Maintenance Checking List
RO water production. This allows for better assurance that there is adequate water available when desired, even during heavy use times of the day. PurePro ROYAL RO with its supreme quality ensures a great water flow rate with absolutely the least wasting of water. -
Page 3: What Is Reverse Osmosis
Water flow Q: What does the PurePro series drinking water taste like? The taste of the PurePro water depends on the amount of contaminants in the tap water originally. If 95% of dissolved minerals and chemicals are removed, the R.O. water may taste like distilled water (no minerals), bottled water (low mineral), or natural spring water (moderate mineral content). - Page 4 Components & Selected filters Operation regulation ¨Components A.With everything connected, turn on the water check for leaks. B.Make sure the storage tank shut-off valve is "OFF". Open the sink top faucet. C.Within a few minutes (up to 15) the water will start to run from the faucet slowly.
-
Page 5: Cartridge Filters
Operation regulation Cartridge filters Cartridge Filters Filter Description Plug in electricity. Turn on water source. Service Life Stage 1 RS300ST 6 Months To RO system With only five micron rating. It is effective in 5 Micron removing dirt, rust and sand particles. Sediment Filter Stage 2 RS300ND... -
Page 6: Change Membrane
The parts of RS-103TDS Change membrane Unplug electricity. Turn off water source. Switch off water tank. Micro computer controller FULL FLUSH WORK SOURCE MANUAL T.D.S./Time MANUAL Pump FLUSH RESET T.D.S.(XI ppm)/Time(X 10m) RO Computer Controller To RO system Pressure gauge... -
Page 7: Change Filters
Change filters LCD display Turn off water source. Unplug electricity. To RO system T.D.S./Time FULL FLUSH WORK SOURCE MANUAL MANUAL FLUSH RESET T.D.S.(XI ppm)/Time(X 10m) RO Computer Controller Loose the used pre-filter clockwise Switch off water tank. and remove it. ¨Function express FULL Pump stops producing when tank is full of pure water. -
Page 8: Installation Diagram
Tubing connection diagram Installation diagram CONNECTING THE COLOR TUBING: Input water : Install water tank : A. Connect the WHITE tubing to the water supply connector. Tank ball shut- off valve Water supply connector To RO system B. Connect the BLUE tubing to the sink top faucet. Hand tighten To RO system C.
Need help?
Do you have a question about the RS-103TDS and is the answer not in the manual?
Questions and answers