Troubleshooting - Kobalt KB18 Manual

TROUBLESHOOTING

If you have any questions regarding the product, please call customer service at 1-888-3KOBALT
(1-888-356-2258), 8:00 a.m. - 8:00 p.m., EST, Monday - Friday.
PROBLEm
Air leak near the top of
the tool or in the trigger
area.
Air leak near the
bottom of the tool.
Tool does not operate
or operates sluggishly.
Tool jams frequently.
POSSIBLE CAUSE
1. Loose screws.
1. Loose screws.
1. Inadequate air supply.
1. Incorrect fasteners.
2. Damaged fasteners.
3. Loose magazine.
4. Dirty magazine.
CORRECTIvE ACTION
1. Tighten screws.
1. Tighten screws.
1. Verify adequate air supply.
1. Verify that fasteners are the correct
size.
2. Replace fasteners.
3. Tighten screws.
4. Clean magazine.
15
kobalttools.com