ATCOM AT820 Quick Start Manual page 4

AT820 AT820 Quick Quick Start Start
AT820 AT820 Quick Quick Start Start Guide
C. Repeat A and B. It is the right picture of putting on desk after fixing the two feet
below:
D. Disassemble the feet:
Press the plate with word "PUSH" and pull the feet with the direction of arrow.
When the plate is pull out of the slot (there will be a sound of "pa") you can take
off the feet
2) On wall position
A. Put the bottom side of the IP phone upside and push the plate with letter "PUSH"
into the slot, please refer the picture as below:
B. Push the other plate into the slot in accordance with the direction of the arrow
ATCOM TECHNOLOGY CO., LIMITED
Guide Guide
Guide