Yamaha YZ250 Owner's Service Manual page 37

E. Pass the radiator breather hose
outside the engine bracket and
inside the down tube. Then pass
the radiator breather hose inside
the CDI magneto lead.
F. Clamp the CDI magneto lead,
radiator breather hose, YPVS
breather hose and neutral
switch lead (except for USA and
CDN) to the frame.
G. Clamp the radiator breather
hose, CDI magneto lead and
neutral switch lead (except for
USA and CDN) to the frame.
H. Pass the CDI magneto lead, ra-
diator breather hose and neutral
switch lead (except for USA and
CDN) in front of the radiator
hose. Then pass the radiator
breather hose inside the CDI
magneto lead and neutral switch
lead (except for USA and CDN).
I. Pass the radiator breather hose
and ignition coil lead between
the frame and the radiator (left).
J. Locate the clamp ends in the ar-
rowed range.
K. Bring the connector cover into
contact with the coupler.
CABLE ROUTING DIAGRAM
2-16