How To Use - LG HBM-240 User Manual

How to use

Controls
Power on / Power off
- Press the MFB button for 3 seconds.
Volume Control
- Briefly press the VOLUME button.
Charging
- When the charger is connected, with the power on or off, the headset will turn off.
- While charging, the LED indicator will show a solid blue light.
- When charging is complete, the LED indicator will turn off.
Battery status check
- Press and hold the VOLUME DOWN button for 3 seconds.
- There are 3 levels of battery status
Battery status
Number of blue LED flashes
Low battery
- An announcement will be made once every 30 seconds.
- If the battery is not charged, the headset will turn off.
Answering a call / Ending a call
- Briefly press the MFB button.
Last number redial*
- Press and hold the MFB button for 1 second to activate "Last Number Redial".
The headset will beep, and call the last number dialed.
Making a call
- If you make a call from the handset, the call will (subject to phone settings) automatically
transfer to the headset. If the call is not automatically transferred, you can manually
transfer the call by briefly pressing the MFB button.
Voice dialing*
- Briefly press the MFB button to activate "Voice Command".
NOTE: If the handset does not support Voice Dialing, it is possible that performing this action
will activate Last Number Redial.
4
High Medium Low
10 flashes 5 flashes 1 flash
Transferring a call*
- While on a call on your handset, briefly press the MFB button on the headset to transfer
the audio to the headset. And to transfer a call from the headset to handset, press and hold
VOLUME UP button for 3 seconds.
Call waiting*
- Answer a second call without hanging up the first call by pressing the MFB button for 1
second (you will hear a beep). Press the MFB button for 1 second to turn to the original
call.
- Briefly press the MFB button to terminate the active call or both calls at once.
(subject to handset's support)
Call Reject*
- Press the MFB button for 1 second when the handset rings.
Out of range
- Operating range up to 10 meters (approximately 33 ft)
- If the headset and handset do not automatically reconnect when they are back within
the required range, briefly press the MFB button on the HBM-240 to reconnect
manually.
* It is possible to use these functions only when your handset supports them. For further
information about using these features, please consult your handset's user manual.
How to use
5