Sharp DV-HR300U Service Manual page 12

Hide thumbs Also See for DV-HR300U:

Table of Contents

DV-HR300U

(6) Removing the DVD unit

1. Remove four screws 9.

2. Remove the DVD unit (with the angle) upward.

3. Disconnect cables including the flat cable and power cable.

4. Remove the gasket.

(7) Removing the rear terminal board and fan

1. Detach the fan cable from the main unit.

2. Remove two screws 0.

3. Detach the fan and fan cover.

4. Remove a screw q, two screws (tuner) w and eight screws e

(terminals)

5. Pull the rear terminal board backward to remove.

(8) Removing the UV PWB, BS PWB, power PWB and terminal PWB

1. Remove UV PWB upward.

2. Disconnect the connection cables from the power PWB and termi-

nal PWB.

3. Remove five screws r.

4. Remove the power PWB upward.

5. Remove two screws t.

6. Remove the terminal PWB upward.

7. Remove two hooks and the PWB holder in the direction of the

arrow.

8. Remove one insulation sheet and three gasket.

Table of Contents