Registering A Handset To A Base Unit; Display Language; Belt Clip - Panasonic KX-TGA659C Installation Manual

TGA659C(e).fm Page 5 Tuesday, December 28, 2010 1:54 PM

Registering a handset to a base unit

1
Base unit:
N KX-TG4111 series
Press and hold {LOCATOR} for about 5 seconds. (No registration
tone)
N KX-TG4131/KX-TG6591/KX-TG6641/KX-TG6651 series
Press and hold {LOCATOR} for about 5 seconds until the
registration tone sounds.
L If all registered handsets start ringing, press {LOCATOR} again to
stop, then repeat this step.
2
Handset:
Place the handset on the base unit or charger, then wait until a long
beep sounds and w is displayed.
Note:
L If an error tone sounds, or if _ is displayed, register the handset
according to the base unit's operating instructions.

Display language

1
{MENU} (11)
2
{r}: Select the desired setting. s {SAVE}
3
{OFF}

Belt clip

N To attach
A
B
N To remove
5