Advertisement
GRAVITY FEED SPOT BLASTER GUN
Due to continuing improvements, actual product may differ slightly from the product described herein.
Read this material before using this product. Failure
to do so can result in serious injury.
SaVe THiS manual.
Copyright
2007 by Harbor Freight Tools
©
any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Maximum Air Pressure
Air Consumption
Air Inlet Size
Hopper Capacity
Dimensions
Unit Weight
You will need this instruction sheet for the safety warnings and precautions, assembly, operating, inspection, maintenance and
cleaning procedures, parts list and assembly diagram. Keep your invoice with this instruction sheet. Write the invoice number on the
front cover. Keep this instruction sheet and invoice in a safe and dry place for future reference.
When unpacking, check to make sure that the product is intact and undamaged. If any parts are missing or broken, please call
Harbor Freight Tools at the number shown on the front of this instruction sheet as soon as possible.
Model 95793
ASSEMBLY AND OPERATING INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Distributed exclusively by Harbor Freight Tools
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
UNPACKING
. All rights reserved. No portion of this manual or
®
90 PSI
7 CFM
¼"-18 NPT
20 Ounces
11" H x 3" W x 10" L
1.8 Pounds
.
®
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Central Pneumatic 95793
Summary of Contents for Central Pneumatic 95793
- Page 1 GRAVITY FEED SPOT BLASTER GUN Model 95793 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed exclusively by Harbor Freight Tools ®...
-
Page 2: Operating Instructions
NOTE: Always dispose of used abrasive bead media according to local solid waste guidelines. For technical questions, please call 1-800-444-3353 SKU 95793 PAGE 2... - Page 3 Do not re-use abrasive. The abrasive breaks down into dust, resulting in poor working visibility and inferior performance. Periodically, run air through the gun without abrasive to check for leaks. Tighten nozzles and hardware if necessary. PARTS LIST/ASSEMBLY DIAGRAM Screen REV 09a, 09c For technical questions, please call 1-800-444-3353 SKU 95793 PAGE 3...
- Page 4 THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 95793 For technical questions, please call 1-800-444-3353 PAGE 4...
Need help?
Do you have a question about the 95793 and is the answer not in the manual?
Questions and answers