MSI FUZZY CX700 User Manual page 56

MS-9802 Mainboard
must be removed from the IRQ pool, the end user can use these settings to
reserve the IRQ by assigning an [Reserved] setting to it. Onboard I/O is
configured by BIOS. All IRQs used by onboard I/O are configured as
[Available]. If all IRQs are set to [Reserved], and IRQ 14/15 are allocated to
the onboard PCI IDE, IRQ 9 will still be available for PCI and PnP devices.
Important
IRQ (Interrupt Request) lines are system resources allocated to I/O devices.
When an I/O device needs to gain attention of the operating system, it signals
this by causing an IRQ to occur. After receiving the signal, when the operating
system is ready, the system will interrupt itself and perform the service re-
quired by the I/O device.
3-20