Manual Tuning Preset - Yamaha R-N602 Owner's Manual

LINE 1
TUNER
TUNER
BAND
BAND
MEMORY
Cursor keys B / C
ENTER
HOME
SETUP
NOW PLAYING
1
Press TUNER to select "TUNER" as the input
source.
2
Press OPTION on the remote control.
The "Option" menu is displayed (p. 42).
3
Press B / C to select "Auto Preset", and then
press ENTER.
OPTION
Auto Preset
READY
01:FM 87.5 MHz
Preset number Frequency
This unit starts scanning the FM band about 5
seconds later from the lowest frequency upwards.
To begin scanning immediately, hold down ENTER.
y
• Before scanning begins, you can specify the first preset number
to be used by pressing PRESET j / i or cursor key (B/C) on the
remote control.
• To cancel scanning, press BAND or RETURN.
When scanning is complete, "FINISH" is displayed and
then the display returns to original state.
LINE 2 LINE 3
NET USB
TUNING
PRESET j / i
PRESET
ENTER
RETURN
RETURN
OPTION
OPTION
VOLUME
MUTE
A
VOL.
A
VOL.

Manual tuning preset

Select a radio station manually and register it to a preset
number. You can then easily recall any preset station by
selecting its preset number.
TUNER
BAND
MEMORY
MEMORY
1
Follow "FM/AM tuning" (p.24) to tune into the
desired radio station.
2
Hold down MEMORY for more than 2 seconds.
The first time that you do register a station, the selected
radio station will be registered to the preset number
"01". Thereafter, each radio station you select will be
registered to the next empty (unused) preset number
after the most recently registered number.
MEMORY
01:FM 98.5 MHz
Preset number
y
To select a preset number for registering, press MEMORY once
after tuning into the desired radio station, press PRESET j / i to
select a preset number, and then press MEMORY again.
985
02:Empty
"Empty" (not in use) or the frequency currently registered
Listening to FM/AM radio
NET USB
TUNING
PRESET j / i
PRESET
ENTER
STEREO TUNED
A
VOL.
STEREO TUNED
A
VOL.
25
En