Dell Inspiron 8100 Service Manual page 114

Removing and Replacing Parts : Dell Inspiron 8100
NOTICE: To avoid damaging the palm rest assembly, you must first remove the
display assembly.
6. Turn the computer over.
7. Remove the nine M2.5 x 20-mm screws (labeled with a "circle P") that secure
the palm rest to the computer.
8. Turn the computer over.
9. Use the pull loop to disconnect the palm rest flex cable from the touch-pad
connector on the system board.
file:///F|/Service%20Manuals/Dell/Inspiron/8100/remove.htm (41 of 56) [2/28/2004 7:37:23 AM]