Black & Decker DINING-IN TO3290XSD Use And Care Manual page 8

OP E R AT I NG YOUR OVE N
Broil Function |
No preheat needed for this function .
1 . Press the broil function button (
2 . The oven will either default to factory function settings or to the last setting
used . (see Function Chart on page 11)
3 . If needed, press the temperature buttons (
temperature .
4 . If needed, press the time buttons (
for a longer time period, and Down for a shorter time period .
5 . Press the Start/Stop button (I/0) to begin broiling .
6 . Place the food in the oven on the top rack position .
Be sure food or baking dish does not come within 1 1/2 inches (3 .81cm) of the
top heating elements .
Note: Place food directly on rack with baking pan in place.
7 . There will be an audible beep once the broil cycle
is complete and the oven will stop heating .
8 . Unplug the appliance when not in use .
Toast Function |
No preheat needed for this function .
1 . Press the Toast function button (
2 . The oven will either default to factory function settings or to the last setting
used . (see Function Chart on page 11)
3 . If needed, press the time/toast shade buttons (
shade . Up arrow for a darker shade, and Down for a lighter shade .
Note: Shades 1-7 are available, 1 being the lightest and 7 being the darkest.
4 . Place food directly on rack in the middle rack position and then press the
Start/Stop button (I/0) to begin toasting .
5 . There will be an audible beep once the toasting cycle is complete and the oven
will stop heating .
6 . Unplug the appliance when not in use .
) . The blue light will illuminate .
) to select the desired
) to select the desired time . Up arrow
) . The blue light will illuminate .
8
) to select the desired