Black & Decker DINING-IN TO3290XSD Use And Care Manual page 10

OP E R AT I NG YOUR OVE N
Frozen Snacks |
Display will blink until desired temperature setting is met . Timer will not start until the
oven is preheated .
1 . Press the Frozen Snacks function button (
2 . When turned on, the oven will either default to factory settings or to the last
setting used . (see Function Chart on page 11)
3 . If needed, press the temperature button ( ) to select the desired
temperature . Up arrow for a higher temperature, and Down for a lower
temperature .
4 . If needed, press the time buttons (
arrow for a longer time period, and Down for a shorter time period .
5 . Press the Start/Stop button (I/0) to begin heating the oven . Display will blink
while oven is preheating .
6 . Once it's preheated there will be an audible beep and the display will stop
blinking; Place the food in the oven on the middle or low rack position to begin
baking .
Note: Use a metal, oven-tempered glass, or ceramic baking dish placed on the
middle or low rack position.
7 . There will be an audible beep once the frozen snack cycle is complete and the
oven will stop heating .
8 . Unplug appliance when not in use
Pizza |
Display will blink until desired temperature setting is met . Timer will not start until the
oven is preheated .
1 . Press the Pizza function button (
2 . The oven will either default to factory function settings or to the last setting
used . (see Function Chart on page 11)
3 . If needed, press the temperature button ( ) to select the desired temperature .
Up arrow for a higher temperature, and Down for a lower temperature .
4 . If needed, press the time buttons (
a longer time period, and Down for a shorter time period .
5 . Press the Start/Stop button (I/0) to begin heating the oven . Display will blink
while oven is preheating .
6 . Once it's preheated there will be an audible beep and the display will stop
blinking . Place the food in the oven, directly on the rack, in the middle or
low rack position to begin baking .
7 . There will be an audible beep once the pizza cycle is complete and the oven
will stop heating .
8 . Unplug appliance when not in use .
) . The blue light will illuminate .
) to select the desired time . Up
) . The blue light will illuminate .
) to select the desired time . Up arrow for
10