Battery Repair; Install Landing Skids/Blade Protection Frame; High-Low Speed Modes; Operation (Mode 1) - Protocol DRONIUM Pilot's Handbook Manual

BATTERY REPAIR & MAINTENANCE
1. Do not immerse or submerge battery in water; store in a cool, dry location.
2. In order to increase battery longevity, avoid repeat charging and excessive discharging.
3. Charge battery to approximately 55% capacity prior to long-term storage.
4. If battery sees no use for extended periods of time, it is recommended that battery voltage
is kept above 3V. Check monthly and recharge as needed.
5. Do not disassemble battery.
INSTALL LANDING SKIDS & BLADE PROTECTION FRAME
1. Install the landing skids to the bottom of the quad-copter (Figure 1).
2. Install the blade protection frame to every corner and tighten the screws (Figure 2).
NOTE: If the quad-copter crashes, double check to make sure the blade protection frame is
not loose. If it is, re-tighten before flying.

HIGH-LOW SPEED MODES

The Dronium features 2 speed modes. Low speed is for beginners and high speed is for
advance users.
Press the speed mode button to adjust speed.

OPERATION (MODE 1)

HOVER UP AND DOWN
Push the throttle up or down, the quad-
copter flies upward or downward.
FIG. 1
FIG. 2
High/Low Speed
mode selector
FORWARD AND BACKWARD
Push the direction lever up or down, the
quad-copter flies forward or backward.
5