Epson PowerLite 1751 User Manual page 94

Setting the Projector ID
Ifyou want t ocontrol multiple projectors
1. Press t he
2. Selectthe Extended menuand pressEnter.
3. SelectProjector ID and pressEnter.
4. Use the arrowbuttonson the remotecontrolto selectthe identification numberyouwantto use for
the projector. T hen pressEnter.
Repeat thesestepsforall the otherprojectors youwantto operatefromone remotecontrol.
Parent topic:
Setting the Remote Control ID
The remote control's
set the remote control tooperate only aparticular
match t he projector's
1. Turn onthe projector
2. Make sure you know the projector's
3. Aimthe remotecontrolat thatprojector.
from aremote control, give each projector
Menu button.
ProjectorIdentification SystemforMultipleProjectorControl
IDisset tozero bydefault soitcan operate any compatible
ID.
you want t he remote control tooperate with exclusively.
IDnumber asset inthe Extended menu
projector, you need toset the remote control's
94
aunique ID.
projector. Ifyou want t o
IDto
Projector ID setting.