Electric Hookup - mabe L1700BBE Manual

FOR THIS LAST CASE, A SERVIPLUS TECHNICIAN SHOULD PERFORM THE CONVERSION BEFORE
YOU CAN USE YOUR RANGE, WITHOUT A CHARGE (VALID ONLY DURING THE FIRST YEAR
FROM THE DATE OF PURCHASE).
TO PREVENT GAS LEAKS USE NEW FITTINGS, APPLY A JOINT SEALER OR SPECIAL TAPE IN AL
EXTERNAL CONNECTIONS.
DO NOT USE AN OPEN FLAME TO FIND GAS LEAKS.
WHEN MOVING THE RANGE AVOID CRUSHING THE GAS CONNECTION TO PREVENT GAS
LEAKS.
BE SURE TO MAINTAIN THE VICINITY OF THE RANGE FREE OF
COMBUSTIBLE MATERIALS, GASOLINE AND OTHER FLAMMABLE
VAPORS AND LIQUIDS.

2.5 Electric Hookup

This appliance is designed to run on a nominal voltage of 127 V~ 60 Hz or
110 V ~ 50 Hz (Depending on model. Refer to electric diagrams).
Check you have a proper receptacle installed on the wall and grounded, checked by a quali-
fied electrician.
If your range has an oven light, before using it make sure the receptacle is properly
grounded and protected by a 15-20 A breaker or fuse
Try not to plug in any other appliance to the same wall receptacle. The electric cord should
not be twisted and avoid any contact with the rear of the range. In case you need an exten-
sion cord, you must use a cord having the same features of the original electric cord.
Never cut or remove the plug's grounding pin.
CORRECT
32
INCORRECT