Burner Installation - Viessmann VITODENS 100-W Installation And Service Instructions Manual

Commissioning, inspection, maintenance
Further details regarding the individual steps

Burner installation

A 4x
F E
1. Fit the burner and tighten four screws
A diagonally to a torque of 8.5 Nm.
2. Insert new gasket and tighten the fit-
tings on gas supply pipe B.
3. Plug the venturi extension C into the
fan.
4. Fit electrical cables to fan motor D,
gas valve E and ignition unit F.
32
B C
D
(cont.)
5. Reopen gas supply and switch on
power supply.