Initiating Or Answering A Base Intercom Transmission; Initiate A Base Intercom Transmission - Motorola MCD 5000 Deskset User Manual

MCD 5000 Deskset User Guide

Initiating or Answering a Base Intercom Transmission

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Initiate a Base Intercom Transmission

6 80 2 9 87 C9 4 - A Ju ly 2 0 1 1
Use the base intercom to communicate between MCD 5000 Desksets connected to the same
radio in the system without transmitting over the radio channels.
To visually verify that base intercom transmission can be initiated, look at the
Base Intercom Button.
Busy LED
If the is on, a parallel MCD 5000 Deskset is transmitting and base intercom
transmission cannot be performed until the
Base Intercom LED
If the inside the
5000 Deskset is using base intercom transmission. Base intercom transmission can be performed
from your MCD 5000 Deskset only when the
Procedure 3-26 describes how initiate a base intercom transmission.
P 3-26 Initiate a Base Intercom Transmission
ROCEDURE
1
Verify that the
2
Press and hold the
Base Intercom LED
Result: The
while the button is pushed.
3
Speak in the direction of the internal microphone (located slightly under the
Transmit Bottom
maintain a speaking distance of 18 inches from the internal microphone.
4
Base Intercom Button
Release the
internal speaker. The
Initiating or Answering a Base Intercom Transmission
Busy LED
is off.
Base Intercom Button
Base Intercom LED
Busy LED Base Intercom LED
and the
Base Intercom Button
inside the
of the MCD 5000 Deskset). For the best transmit audio quality,
to end transmitting and allow audio from the
Base Intercom LED
Busy LED
illuminates red, a parallel MCD
is off.
are off.
.
Base Intercom Button
lights red
turns off when the button is released.
and the
3-39