Wall Mount - Motorola MCD 5000 Deskset User Manual

MCD 5000 Deskset User Guide
Footstand Release Latch

Wall Mount

6 80 2 9 87 C9 4 - A Ju ly 2 0 1 1
P 2-2 Adjust MCD 5000 Deskset Footstand
ROCEDURE
3
Adjust the angle between the MCD 5000 Deskset and the mount surface.
4
Release Footstand Release Latch to lock the MCD 5000 Deskset Footstand in
place.
F 2-2 Adjust MCD 5000 Deskset Footstand
IGURE
The MCD 5000 Deskset Wall Mount Base is an optional component used for mounting a MCD
5000 Deskset on a wall.
N
OTE
Base (Wall Mount Kit, P/N: FHN7394A) is available but not supplied with the
MCD 5000 Deskset.
Wall mounting requires hanging the MCD 5000 Deskset using slots on the bottom side of the
Base and using the Base itself as a mounting template for the screw.
The MCD 5000 Deskset can be mounted onto any plaster, concrete or wood wall surface
provided the appropriate hardware is used.
Procedure 2-3 describes and
P 2-3 Mount the MCD 5000 Deskset on a Wall
ROCEDURE
1
Orient the Base on the wall.
2
Using the Base as a template, mark points on the midline of the slots for the screw
and remove the Base.
3
Connect the Base to the MCD 5000 Deskset.
1
MCD 5000 Deskset Footstand
Cable Holder
Figure 2-3 shows how to mount the MCD 5000 Deskset on a wall.
2
2-3