Philips HTS6600 Service Manual page 21

Dismantling Instructions & Service Positions
4.2 Dismantling of the Subwoofer Power Box
1) Loosen 5 screws at the base of the Subwoofer (as shown
in fi gure 14) and remove 5 screws at the back (as shown
in fi gure 15). Then pull out the Power Box Assembly.
M
Subwoofer Figure 4-14
N
Subwoofer Figure 4-15
2) Remove1 screw for Tuner 1020, 3 screws for Speaker
Board 1060, and 1 screw for AIO board 1050 to detach
them from the Rear Plate 230. Remove 1 screw
attached to the Rear Plate 230 and 2 screws attached
to the bracket 236 for dismantling of the Audio Board
1040. Mounting Screws are shown in fi gure 16 and fi gure
17.
O
Subwoofer Figure 4-16
O
O
O
3139 785 32530
O
Subwoofer Figure 4-17
3) Remove 4 screws for dismantling of the Amplifi er Module
1010 as shown in fi gure 18.
P
Subwoofer Figure 4-18
4. EN 21