EN 14
2.
3139 785 32530
2.2.3 Service Hints for Dismantling of Main Unit
While dismantling of Main Unit, put the packing sheet under
the set as shown in the fi gure to prevent the face of the set
from scratches.
Figure 2-15
Measurements Setup, Service Aid & Lead Free Requirements
2.2.4 Manual Procedure to open the door
1. Remove the stand assembly (refer to chapter 4 for more
details)
2. Remove the cabinet Rear (refer to chapter 4 for more
details)
3. Manually slide the Top & bottom gear at Axial pipe to
manually open the door.
Packing Sheet
4. Remove the disc from the disc compartment.
Top & bottom gear at Axial pipe
Figure 2-16