Sharp LC-32GA8 Service Manual page 29

8. Choose the file for upgrade and click "Open".
9. After select "Open" the upgrade process starts as follows:
When flash update process finishes, the " Flash programming complete " label
appear in the screen , the device automatically go to switch off, and in a few seconds go
to switch on again.
10. When flash update process finishes, the " Flash programming complete " label appear in the screen , the device
automatically go to switch off, and in a few seconds go to switch on again.
VERY IMPORTANT NOTE:
During the updating time, please don't use the PC for other purposes, in order to abolish communication prob-
lems between TV set and PC. If TV set was not updated properly, the TV won't have the software to startup
again, and you must follow the "I2C method" to update another time the TV set.
Enter in service mode and check the main soft version.
Choose the file for upgrade and push "open".
.
After press "Open" button the upgrade process starts as follows:
When flash update process finishes, the " Flash programming complete " label
appear in the screen , the device automatically go to switch off, and in a few seconds go
to switch on again.
Enter in service mode and check the main soft version.
VERY IMPORTANT NOTE: Seguir con el service manual actual
29
LC-26GA5E
LC-32GA8/LC-32BV8
LC-32GA5E
LC-37GA8/LC-37BV8