Sharp LC-32GA8 Service Manual page 28

LC-26GA5E
LC-32GA8/LC-32BV8
LC-32GA5E
LC-37GA8/LC-37BV8
5. Select follows settings:
Serial port to use: COM x
Check the connection between TV set and PC, sending a wrong command, as for
Baud rate:
example: "aaa". TV set returns an "err" label as an syntaxis ERROR (Not correct order
Data:
Parity:
or sequence).
Stop:
Send a "DWMD" (capital letters) command to enter TV set in Download Mode.
Flow control:
Enter O.K.
Change a baud rate to 115200.
Select setup � baud rate � 115200 � O.K.
Select a follow settings:
Serial port to use: COM x
Baud rate: 9600
Data: 8 bits
Parity : none
6. Check the connection between TV set and PC, sending a wrong command, as for example: "aaa". TV set returns
Stop: 1 bit
an "err" label as an syntaxes ERROR (Not correct order or sequence).
Send a "DWMD" (capital letters) command to enter TV set in Download Mode.
Flow control: none
Change a baud rate to 115200.
Click O.K.
Select: Setup ⇒ Baud rate ⇒ 115200 ⇒ O.K.
Check the connection between TV set and PC, sending a wrong command, as for
example: "aaa". TV set returns an "err" label as an syntaxis ERROR (Not correct order
or sequence).
7. Select: File ⇒ Transfer ⇒ XMODEM ⇒ Sent
Select to File � transfer � XMODEM � sent
9600
8 bits
none
1 bit
none
Send a "DWMD" (capital letters) command to enter TV set in Download Mode.
Change a baud rate to 115200.
Select setup � baud rate � 115200 � O.K.
28