Sony CDX-C680 Operating Instructions Manual page 22

Erasing an entire programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
DISC
PLAY MODE
"P 1" shows Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display "P 1" above.
2
Press (2) (N) repeatedly until "DEL"
appears.
PLAY MODE
To erase Programme 2, press (5) (n)
repeatedly until "PGM 2" appears.
EN
3
Press (6) (ENTER) for two seconds.
PLAY MODE
The entire programme is erased.
4
When you finish erasing programmes,
press (4) (PLAY MODE) for two seconds.
5
Press (SHIFT).
22
TRACK
ENTER
ENTER
ENTER
Adding tracks to a programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
DISC TRACK
PLAY MODE ENTER
"P 1" shows Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display "P 1" above.
To select Programme 2, press (5) (n)
repeatedly until "P 2" appears.
2
Press (2) (N) or (5) (n) to select the
track slot number where you want to
insert a track.
Track slot number
DISC TRACK
PLAY MODE ENTER
3
Push the SEEK/AMS control up or down
to select the track you want to insert.
4
Press (6) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled,
"*Mem Full*" appears in the display, and you
cannot insert tracks.
5
When you finish inserting tracks, press
(4) (PLAY MODE) for two seconds.
6
Press (SHIFT).