Play/Pause Mode; Skip And Search Mode; Repeat Mode - Jensen JiSS-120i User Manual

AUDIO CD DISC PLAYBACK
1. When the CD door is closed and a CD is inside, the total number of the tracks
appears on the display.
2. Press the PLAY/PAUSE
will play. PLAY/PAUSE indicator lights steadily.
3. Adjust the VOLUME control to obtain the desired sound level from the
Built-in Speakers.
IMPORTANT!!
If the disc is smudged or scratched it may skip or stop completely. This does not indicate a
problem with the player. If this occurs, try playing another disc. If that disc plays properly,
you may assume that the first disc is damaged and unplayable.

PLAY/PAUSE MODE

1. To temporarily stop playback while the CD playback disc is playing, press
the button once. PLAY/PAUSE indicator flashing, playback is now
paused.
2. The sound pauses, but the disc will continue to spin. To re-start playback,
press the
paused.
3. To stop the CD playback, press the STOP

SKIP and SEARCH MODE

1. In play or pause mode, press the Skip/Search Forward
forward to the next track or repeatedly to skip multiple tracks. Press the Skip/Search
Backward
repeatedly to skip backward several tracks.
2. During play mode, when the
high speed audible search of the track, either forward or backward depending on
which button is pressed.

REPEAT MODE

1. Repeat One:
In the CD play mode, press the REPEAT button once, the REPEAT
indicator will show on the display and flash. This single track of music
will be repeated.
2. Repeat All:
In the CD play mode, press the REPEAT button twice, the REPEAT
indicator will show on the display steadily. The whole disc will be
played repeatedly.
3. To cancel repeat function
Press the REPEAT button repeatedly until all the play mode indicators go off on
the display. Standard playback mode will now resume.
NOTE: Repeat play function only works in CD mode.
button to start CD playback, the first track
buton again. The music will start from the exact position where it was
button to return to the beginning of the track, or press the button
button once.
or button is pressed and held, the unit will do a
- EN 9 -
button once to skip