Door Alignment; Fan And Fan Motor; Replace Door Frame Cover - LG LFX28977ST/01 Service Manual

2) Press gasket into channels on the three remaining
sides of door.

3. Replace door frame cover

Starting at top of cover and working down, snap cover
back into door.

3-3 Door Alignment

If the space between your doors is uneven, follow the
instructions below to align the doors:
Remove the Base Grillie. Turn the leveling legs (CCW) to
raise or (CW) to lower the height of the front of the
refrigerator by using flat blade screw driver or 11/32"
wrench. Use the wrench (Included with the User Manual) to
adjust the bolt in the door hinge to adjust the height. (CCW
to raise or CW to lower the height.)
Figure 6
Figure 7
3-4 FAN AND FAN MOTOR(EVAPORATOR)
1. Remove the freezer drawer. (If your refrigerator has an
icemaker, remove the icemaker first)
2. Remove the plastic guide for slides on left side by
unscrewing phillips head screws.
3. Remove the grille by removing four screws and pulling
the grille forward.
4. Remove the Fan Motor assembly by loosening 3 screws
and disassembling the shroud.
5. Pull out the fan and separate the Fan Motor and Bracket.
BRACKET
MOTOR
- 8 -
FAN MOTOR
Figure 8
Shroud
Figure 9