Mazda 2007 MX-5 Miata Sport Manual page 47

Fig. 49: Attaching Double-Sided Adhesive Tape To Rear Trim
Courtesy of MAZDA MOTORS CORP.
REAR SIDE TRIM REMOVAL/INSTALLATION
EXCEPT POWER RETRACTABLE HARDTOP
1. Remove the following parts:
1. Console (See CONSOLE REMOVAL/INSTALLATION .)
2. Quarter trim (See QUARTER TRIM REMOVAL/INSTALLATION .)
3. Scuff plate (See SCUFF PLATE REMOVAL/INSTALLATION .)
4. Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION .)
5. Aeroboard (See AEROBOARD REMOVAL/INSTALLATION .)
6. Front seat back bar garnish (See SEAT BACK BAR GARNISH
REMOVAL/INSTALLATION .)
7. Back trim (See BACK TRIM REMOVAL/INSTALLATION .)
8. Seat belt set plate (See SEAT BELT REMOVAL/INSTALLATION .)
9. Seat back crossmember assembly (See SEAT BACK CROSSMEMBER ASSEMBLY
REMOVAL/INSTALLATION .)
2. Remove the fasteners.
3. Pull the rear side trim outward and detach pins A, B and tab C.
4. Remove the rear side trim.
2007 Mazda MX-5 Miata Sport
2007 ACCESSORIES & BODY, CAB Interior Trim - MX-5 Miata