Mazda 2007 MX-5 Miata Sport Manual page 21

8. Disconnect the accessory socket connector.
9. Remove the console panel.
10. Install in the reverse order of removal.
Fig. 22: Removing Console Panel
Courtesy of MAZDA MOTORS CORP.
A-PILLAR TRIM REMOVAL/INSTALLATION
1. Remove the female wedge. (See CONVERTIBLE TOP DISASSEMBLY/ASSEMBLY .)
2. Pull the A-pillar trim, then disengage clips A and B.
3. Pull the A-pillar trim upward, then disengage tabs C from the body.
4. Remove the A-pillar trim.
5. Install in the reverse order of removal.
2007 Mazda MX-5 Miata Sport
2007 ACCESSORIES & BODY, CAB Interior Trim - MX-5 Miata