WELCOME TO THE BRIGHT, VIVID AND JOYFUL COLOUR WORLD Dear customer, Thank you for your purchasing this colour TV and we wish you many years of viewing pleasure with your new TV.Before operating the set, please read this manual carefully and keep it handy for future reference. High voltage inside.
Maintenance And Safety Information Please read these instructions carefully and do accordingly. TV set requires adequate ventilation. If you place the set near walls, leave sufficient space (15cm) on all sides so that the air can circulate freely. The ventilation slots at the rear of the set can not be covered by curtains, newspapers or any other similar objects.
Installation Install the unit where sunlight will not fall upon the screen directly. Total dark environment or a reflection on the picture screen may cause eyestrain. Soft indirect lighting is recommended for comfortable viewing. Allow enough space between the unit and the wall for proper ventilation. Avoid excessively warm locations to prevent possible damage to the cabinet or components.
Remote control handset Infrared LED STANDBY STANDBY To switch the TV off to standby mode or on to last viewed program MENU TV/AV To call up the main menu To select signal source TV/AV MENU NO PIC To call up music mode SLEEP (no picture, only sound)or quit To set sleep timer...
Basic operation Power/Standby on/off STANDBY To power up the TV, press the power switch located on the bottom-right of the cabinet. The power indicator lights red and the last viewed program appears. If the power indicator lights up but no picture appears, the TV may be in standby mode.
Basic operation Muting the sound MUTE The muting function is useful and convenient when you need to pay attention to surrounding sounds, answer a phone call, receive a visitor, etc. Press the mute key to mute the sound and cancel the mute by pressing it again. Note: when the mute function is set to ON : 1.Pressing the V+ will cancel the mute function and in c rease the volume.
Basic operation LOCK LOCK Press LOCK key and input the PIN to call up Lock menu as shown below: LOCK LOCK PROGRAM PIN ---- CHANNEL LOCK CHILD LOCK Note: The primary PIN is '0000'. HOTEL MODE CHANGE PIN VOLUME LIMIT SEARCH NEW PIN ----...
Basic operation Preset menu MENU Press MENU key to call up Preset menu as shown below: Preset * AUTO STORE * PROGRAM COLOR SYSTEM AUTO SOUND SYSTEM START Preset * SEARCH * PROGRAM Preset COLOR SYSTEM AUTO SOUND SYSTEM PROGRAM BAND VHF-L AUTO STORE...
Connecting to audiovisual equipment Your existing VCR,DVD player,or other equipment can be connected to this television using a variety of connection terminals available on the back and side panels. You can also record the TV programs to a video tape by VCR. Connect the devices as described in the figure.
SPECIFICATIONS MAIN UNIT TV Receiving System---------------------------PAL,BG AV Color System---------------------------------PAL,NTSC 3.58 & 4.43 Tuner-----------------------------------------------Voltage synthesized tuner Number of Preset Program---------------------200(0-199) Channel Indicator--------------------------------On screen display Function Adjust Indicator-----------------------On Screen Display(OSD)Menu system Language of OSD--------------------------------English RF Aerial input------------------------------------75-ohm unbalanced Video Input/Output------------------------------75-ohm 1.0Vp-p, RCA Audio Input----------------------------------------10k ohm 0.5 Vrms, high impedance Audio Output--------------------------------------1k ohm 0.5 Vrms Audio Output Power----------------------------- 5w...
Page 15
TEAC CORPORATION 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Phone: (0422) 52-5081 TEAC AUSTRALIA PTY.,LTD. A.B.N.:80 005 408 462 HEAD OFFICE 280 William Street, Melbourne, VIC 3000 Phone : (03)9672 2400 SERVICE DIVISION MELBOURNE, VIC Pier 31 Lorimer Street, Port Melbourne, VIC 3207...
Need help?
Do you have a question about the CT-F5170 and is the answer not in the manual?
Questions and answers