Introduction And Package Contents; Hardware Configuration - Barracuda Networks F10 Installation Manual

Introduction and Package Contents

Your new Barracuda NG Firewall F10 Rev. B is an integrated security appliance preinstalled with
Barracuda NG Firewall firmware. This winning combination offers a ready to run security solution that
is flexible, affordable and easy to deploy.

Hardware Configuration

Table 1
F10 Rev. B Hardware
Component
CPU
Memory
Flash Disk
Form Factor
Dimensions (W/D/H)
Net Weight
Power Supply Input Voltage
Power Supply Output Voltage
Power Supply Frequency
Power Supply Watts
Storage Temperature
Operation Temperature
Relative Humidity
Certifications
The hardware configuration list in Table 1 was valid at the time this manual was published. The listed components are
subject to change at any time, as Barracuda Networks may change hardware components due to technological
progress. Therefore, the list may not reflect the current hardware configuration of the Barracuda Networks NG Firewall
or NG Control Center appliance it was delivered with.
7 Appliance Installation Guide
Description
VIA 500 MHz
512 MB
4 GB
Mini Desktop
24 x 16.6 x 3 cm
2 kg
100 - 240 V, AC
12 V, DC
47 Hz - 63 Hz
60 W
-20 °C - +70 °C
0 °C - 40 °C
5% - 95%, non-condensing
CE, FCC, ROHS