Sony SRS-X88 Help Manual page 334

Help Guide
Troubleshooting
Personal Audio System
SRS-X88
The speaker cannot connect to a network using the WPS button
Set up your network after searching the wireless router/access point using the computer connected to the speaker
(access point scan).
Update the firmware of the wireless router/access point to the latest version.
Press and hold the WPS button for about two seconds until beeps are heard.
Refer to the operating instructions of your wireless router to make sure you are operating the WPS button on the
wireless router correctly.
Depending on the wireless router, press and hold the WPS button for a few seconds. For details, refer to the
operating instructions of your wireless router.
Place the speaker closer to your wireless router.
Confirm that the Wi-Fi antenna is set.
If the settings are correct, try the following.
Turn off the wireless router/access point, wait a while and turn on the power again.
Turn off the speaker, wait a while and turn on the power again.
Related Topic
Selecting the Wi-Fi network connection method
4-566-484-11(1)
Copyright 2015 Sony Corporation
318