Sony SRS-X88 Help Manual page 280

4. Perform the pairing procedure on the BLUETOOTH device to detect the speaker.
When a list of detected devices appears on the display of the BLUETOOTH device, select [SRS-X88].
*
If a passkey is required on the display of the BLUETOOTH device, enter "0000."
*
A passkey may be called "Passcode", "PIN code", "PIN number" or "Password."
5. Make the BLUETOOTH connection from the BLUETOOTH device.
When the BLUETOOTH connection is established, the
If the BLUETOOTH connection is not established, repeat from step 3.
Hint
For details, refer to the operating instructions supplied with the BLUETOOTH device.
You can perform pairing or connect to another BLUETOOTH device even when a BLUETOOTH connection is
established. In this case, the previous connection will be disconnected.
SongPal has no function of play music via a BLUETOOTH connection. Play music with your BLUETOOTH device
such as smartphone, computer, etc.
Note
Stop playback on the BLUETOOTH device and turn down the volume of the device beforehand. Otherwise, you may
experience sudden loud sound output from the speaker when music is played back for the first time after pairing.
Pairing mode of the speaker is released after about 5 minutes and the
However, when pairing information is not stored in the speaker, such as when you turn on the speaker for the first
time after purchase, pairing mode is not released. If pairing mode is released before finishing the process, repeat
from step 3.
When pairing with a BLUETOOTH device that cannot display a list of detected devices or that has no display, you
may pair the device by setting both the speaker and the BLUETOOTH device to pairing mode. In this case, if a
passkey besides "0000" is set on the BLUETOOTH device, pairing cannot be done with the speaker.
Once BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases:
Pairing information has been deleted after repair, etc.
The speaker is already paired with 9 devices and another device is to be paired.
The speaker can be paired with up to 9 devices. If a new device is paired after 9 devices are already paired, the paired
(BLUETOOTH) indicator stays lit.
(BLUETOOTH) indicator flashes slowly.
264